1U GLOBAL UPS^TM
Deployable Dual Voltage – Auto Sensing Uninterruptible Power Supply (UPS) (90-230 VAC)                                              

Part Number: DV-1U-450-A
(www.1uglobalups.com)

 The 4K Solutions, LLC's, 1U GLOBAL UPS^TM is a "Patent Pending" dual voltage autosensing uninterruptible power supply in the 1U Rackmount size that prevents data loss, downtime, and equipment damage due to power outages, voltage fluctuations, and transient surges. The 1U Global UPS^TM occupies only one rack space (1U) in a standard rack enclosure, and is designed for use worldwide. The quad battery design offers approximately 10 minutes half load runtime and approximately 2-5 minutes at full load. 120V nominal output is maintained and regulated using battery power during brownouts and overvoltages. 450 watt power handling capability and full time modified sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic applications. An easy to read front display provides immediate status of AC Load, Battery Level, AC or DC Operation and an Alarm signal; both audio and visual. A total of 4 VAC outlets, DC switch & one Grounding Point are located on the rear panel. The 1U Global UPS^TM are assembled in the USA!

The 1U GLOBAL UPS^TM rear panel provides for a NEMA standard AC input, USB port, a grounding point, four ac outlets and a reset switch. 

4K Solutions Radio Over IP (WAVE) Kit configured with our 1U Global UPS.






S



Small Deployable Node (SDN) Baseband Kit - 4K Solutions configured with the 1U Global UPS.

The 1U Global UPS is now available for immediate purchase on the NASA SEWP IV (GWAC): http://www.sewp.nasa.gov/cgi-bin/mfr_clin_list.pl?MFR=4K_Solutions,_LLC,spl1t,ALVAREZ&ACTION=FIND

Trade Ageement Act (TAA)
TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to foster fair and open international trade. TAA requires that the U.S. Government may acquire only “U.S. – made or designated country end products. This act requires that contractors must certify that each end product meets the applicable requirements. End products are ‘those articles, materials and supplies to be acquired for public use’.” This includes items which have been “substantially transformed” in the United States.

4K Solutions’s TAA compliant products are assembled in the U.S.A and are approved to be acquired by the United States Government for use. These products are also compliant with GSA Schedules

For more information or to order your 1U Global UPS, please contact 4K Solutions, LLC
(706) 593-9070
sales @ 4ksolutions

 

Specifications
450 Watt
Acceptable input voltage	90-230 VAC
Input frequency	45-66 HZ
Input Current	2000 W: 20 A/114 at 115/230 VAC
Inrush Current	2000 W: 35A/20A at 115/230 VAC
Power Factor	0.99 50% Load or more
Earth Leakage Factor	<1.0 mA (3 kW: <2.5 mA) at 240VAC/60 Hz
Output voltage	115 VAC
Input Over Current Protection	System Shut Down Protection - Manual Restart Required
Frequency limits (on-line operation)	47 - 63 Hz
Transfer time	4 ms typical, blackout response time
Maximum load	450 W
On-battery output voltage	115 VAC
On-battery frequency	60 Hz, ±0.1 Hz; unless synchronized to utility during brownout
On-battery waveshape	Stepped sine-wave
Output Over Current Protection	Overcurrent and short-circuit protected, latching shutdown on overload
Battery type	Spill proof, maintenance free, sealed lead-acid, DOT Certified
Typical battery life	2 to 5 years, depending on number of discharge cycles and ambient temperature
Typical recharge time	4 - 7 hours from total discharge
Operating temperature	-13 to 140 °F
Storage temperature	-40 to +85 °C (-40 to +185 °F)
Operating and storage relative humidity	5 to 95%, non-condensing
Operating elevation	0 to +3,000 m (0 to +10,000 ft)
Storage elevation	0 to +15,000 m (0 to +50,000 ft)
Audible noise at 1 m (3 ft)	<38 dBA
Size (H x W x D)	1.676 x 17.00 x 17.94 in.
Weight	21 lbs
Safety and approvals	UL1778, CSA 107.1
Emissions	EN55022 class B conducted & radiated
Harmonic Currents	EN61000-3-2 class A, 650 & 1000 W:
Voltage Flicker	EN61000-3-3
ESD Immunity	EN61000-4-2, ±4 kV contact,±8 kV air discharge, Perf Criteria A
Radiated Immunity	EN61000-4-3, 3 V/m, Perf Criteria A
EFT/Burst	EN61000-4-4, level 2, Perf Criteria A
Surge	EN61000-4-5, installation class 3, Perf Criteria A
Conducted Immunity	EN61000-4-6, Perf Criteria A
Magnetic Field	EN61000-4-8, Perf Criteria A