Wireless


4K Solutions is proud to offer through our partnership the Deployable Line-of-Site (LOS) Kits.
Our solution is based on the Cambium Networks PTP-45600 wireless radios.

Cambium Networks PTP45600
CambiumNetwork offers two point-to-point (PTP) wireless broadband solutions that are optimized to meet the needs of Federal and NATO agencies – the PTP 45600 which operates in the 4.4 to 4.6 GHz licensed radio frequencies and the PTP 48600 which operates in the 4.7 to 5.0 GHz licensed frequencies. Because the PTP 48600 frequencies encompass the 4.9 band, Federal agencies have the flexibility to utilize these same radios for public safety and to collaborate with local and state agencies.
Both the PTP 45600 and PTP 48600 Wireless Ethernet Bridges provide outstanding throughput, reach and reliability to support tactical communications, Telemetry and LMR backhaul, persistent awareness, hub-and-spoke backhaul for edge mobility and a host of other connectivity operations. With technology that allows you to connect previously inaccessible locations, PTP 45600 and PTP 48600 solutions can deliver up to 99.999% link availability in non-line-of-sight environments, across long-distance line-of-sight
Radios and Mounting Assembly
Roll-Around Deployment Cases (2)
Driven by US Special Operations Forces requirements the 4K Solutions' LOS solutions are used throughout the GWOT in Iraq and Afganhistan, they continue to be used to tie in geographically separated users for the following solutions:
- NIPRNET "last-mile connectivity"
- SIPRNET "last-mile connectivity"
- UAV (live video), used to pull and push live UAV video from Tactical UAV shelters
- First Responder Command Centers
4K Solutions' Deployable LOS Kits provide the remote-end with a ruggedly packaged solution that includes best in breed technologies from Cisco, APC, and Motorola. HAIPE encryptors are customer driven or GFE.


4K Solutions is proud to announce our distribution partnership with Nextmove Technologies, Inc.
Nextmove designs and manufactures low cost antenna positioners.
The LinkAlign Antenna positioners support line-of-site antennas from these manufacturers:
- Cambium Networks
- RedLine
- Harris Corporation
- TCS
The LinkAlign Antenna positioners have been successfully tested at the US Army Network Integration Exercise (NIE)
LinkAlign-65RPT LinkAlign-65RPT comes standard with the Pan and Tilt 65RPT Positioner with embedded controller, Antenna mount bracket, Quick Mount Bracket System, Power over Ethernet (PoE) power supply , and 100 foot PoE cable. Features and Benefits The LinkAlign-65RPT is a low cost antenna positioner for limited range of motion applications. A web based user interface provides control and position feedback. The positioner utilizes standard Power over Ethernet (PoE). This simplifies installation by allowing for the use of a single light-weight Ethernet cable of up to 300 feet in length. The LinkAlign-65RPT is constructed of hard coat anodize 5052 Aluminum and 300 series stainless steel hardware. The rugged design and sealed electronics enclosure can withstand the harshest of environments. LinkAlign-65RPT comes standard with the Pan and Tilt 65RPT Positioner with embedded controller, Antenna mount bracket, Quick Mount Bracket System, Power over Ethernet (PoE) power supply , and 100 foot PoE cable. Features and Benefits
LinkAlign-65RPT
![]()
LinkAlign-360RPT
LinkAlign-360RPT comes standard with the Pan and Tilt 360RPT Positioner with embedded controller, Power over Ethernet (PoE) power supply , and 100 foot PoE cable.
Features and Benefits
- 360RPT (Remote Pan and Tilt) Positioner
- 360° range in azimuth/pan and 20° range in elevation/tilt
- Weighs less than 20 lbs
- Controller & User Interface
- Automated antenna positioning using embedded compass & GPS
- User interface over any standard web browser
- Control software hosted on integrated controller - no software to load
- Minimal training required
- Easy and flexible installation
- Accepts standard 2" diameter masts
- Tool-less installation for rapid deployment
- Antenna & radio agnostic (flat or parabolic less than 2.5 feet)
- Mutliple antenna brackets and radio mounting options available
- PoE operation
- 15 to 48VDC input, 24VDC PoE supply included with unit
- Single 100’ cable provides power and control (other lengths up to 300' are available)
Comes standard with weather proof connector on outdoor end
LinkAlign-360RPTThe LinkAlign-360RPT is an automated antenna positioner for full azimuth range of motion applications. A web based user interface provides control, position feedback, and embedded compass & GPS tools. These tools provide a one step solution for accurate pointing to your target. The positioner utilizes standard Power over Ethernet (PoE). This simplifies installation by allowing for the use of a single light-weight Ethernet cable of up to 300 feet in length. The LinkAlign-360RPT is constructed of hard coat anodize 6061 Aluminum and 300 series stainless steel hardware. The rugged design and sealed electronics enclosure can withstand the harshest of environments. |
|
|
LinkAlign-360RPT comes standard with the Pan and Tilt 360RPT Positioner with embedded controller, Power over Ethernet (PoE) power supply , and 100 foot PoE cable. Features and Benefits
|
|
The LOS Kits are available purchase on the NASA SEWP IV (GWAC): http://www.sewp.nasa.gov/cgi-bin/mfr_clin_list.pl?MFR=4K_Solutions,_LLC,spl1t,ALVAREZ&ACTION=FIND
Please contact us today to request a quote. E-mail: sales @ 4ksolutions.com